OxyGuard Products
OxyGuard PWS
24V DC power supply for OxyGuard 8 Systems
The OxyGuard PWS is a power supply designed for use with the OxyGuard 8 multichannel unit. It can be used for other purposes demanding a rugged, totally enclosed power supply. The PWS is built up in the traditional manner with a 50/60 Hz transformer, rectifier, capacitor and voltage regulator. The aluminium casing is also used as a heat sink for the regulator.
A 24 VDC emergency supply can be connected. If there is a mains failure the output of the PWS will be switched to this emergency supply automatically. The switch is effected by a relay, and a brief interruption in the output will occur. This can be used to trigger an alarm.
Specifications
Construction: Cast aluminium enclosure with terminals, transformer, regulator etc.
Dimensions: 18.5 x 10 x 14 cm
Weight: 3.5 kgs
Input: Mains: Either 220/240 VAC, 110 VAC.
Emergency: 24 VDC.
Output: 24 VDC, 1.5 A continuous loading.
Operating Conditions: -10 to +40°C. Enclosure rated IP67
Ordering Information
A06DC110 for 110 V mains
A06DC230 for 230 V mains.
Terminals
Click to Enlarge
Data subject to change without notice.
