OxyGuard Redox Probes

General Information

All OxyGuard redox/ORP probes consist of a body, an electrode, a preamplifier and cable. The heavy duty types also have an electrolyte container. The special design of the probes eliminates the problems of moisture sensitivity and electrical noise sensitivity that are frequently met with other designs of probe. OxyGuard redox/ORP probes work well in wet conditions, and will continue to do so until the electrode needs attention.

Two main types of probe are available, light-duty probes for lighter applications, and heavy-duty probes for applications where the process destroys normal electrodes in a short space of time.

This brochure lists the various types of probe available "off the shelf", but probes can on request be manufactured in other materials or to meet special needs.

Light-Duty Probes

Four designs are found - flow-through, thread mount, submersion and immersion. They are manufactured in PVC and can be used at temperatures up to 60°C and depths up to 2 m. The electrode tip of the flow-through model extends approximately 1 cm into the tube. In other types the electrode tip is protected by the housing.

The immersion type can be delivered in mounting lengths of 500, 1000 and 1500 mm. Please state length when ordering. The probes are fitted with a platinum/silver-silver chloride combination electrode.

Ordering Information

Light-Duty redox/ORP Probes, shipped complete with electrode and 50 ml check solution:
K02RF: Flow-through probe, 3/4" to 2", please state when ordering.
K02RM: Immersion probe, 500 mm. Other lengths on request.
K02RS: Submersion probe.
K02RT: Thread-mount probe, 1" BSP. Other thread sizes on request.
The flow-through, submersion and thread-mount probes can be ordered with a 1" pipe thread at the top. Please add suffix "TT" to the ordering number.

Spares:

K10RELLD: Light-duty redox/ORP electrode - platinum/silver-silver chloride.
K10RCH25: 25 ml check solution. K10RCH1L: 1 l check solution.
K10RCH50: 50 ml check solution.

Ordering Information

Heavy-duty redox/ORP probes, with platinum electrode, reference electrolyte container, 250 ml reference electrolyte, 50 ml check solution. K03FVORP: PVC flow-through probe.
K03FPORP: PP flow-through probe.
K03SVORP: PVC submersion probe.
K03SPORP: PP submersion probe.
K03TVORP: PVC thread-mount probe.
K03TPORP: PP thread-mount probe.
K03TVCORP: PVC thread-mount probe with probe cleaner
K03TPCORP: PP thread-mount probe with probe cleaner.
The flow-through, submersion and thread-mount probes can be ordered with a 1" pipe thread at the top. Please add suffix "TT" to the ordering number.
Please consult OxyGuard for details of the immersion type probe or gold or silver electrodes. Refer to the separate brochure for the hygienic probe.

Spares:

K10RELF: Heavy-duty platinum redox/ORP electrode for flow-through, submersion and thread mount probe.
K10REFCON: Reference electrolyte container. K10RCH25: 25 ml check solution.
K103M0500: 500 ml 3 mol. KCL reference electrolyte K10RCH50: 50 ml check solution.
K103M01L: 1 l 3 mol. KCL reference electrolyte. K10RCH1L: 1 l check solution.